Eizo ColorEdge CS230 User Manual page 25

2.
Prepare to use analog screen adjustment patterns.
Load the "EIZO LCD Utility Disk" to your PC, and then open the "Screen adjustment pattern files".
Note
• For details and instructions on opening the "Screen adjustment pattern files", refer to the Readme.txt file.
3.
Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
●
To adjust flickering, screen position, and screen size automatically
Procedure
1. Display Pattern 1 in full screen on the monitor using the "Screen adjustment pattern files".
2. Choose "Screen" from the Adjustment menu, and press
3. Choose "Analog Adjustment" from "Screen", and press
4. Choose "Auto Adjustment" from "Analog Adjustment", and press
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
IfthescreenisnotdisplayedcorrectlyevenafterperformingAutoAdjustment,performtheadjustments
accordingtotheproceduresonthefollowingpages.Ifthescreenisdisplayedcorrectly,goto"Toenhance
outlineofimage"(page21).
4.
Choose "Screen" from the Adjustment menu to perform advanced
adjustments.
Adjust the clock, phase and position, in this order.
●
To eliminate vertical bars
Procedure
1. Choose "Analog Adjustment" from "Screen", and press
2. Choose "Clock" from "Analog Adjustment", and press
The "Clock" menu appears.
3. Adjust the clock with
Press or slowly so as not to miss the adjustment point.
4. Press to exit.
When blurring, flickering or bars appear on the screen after adjustment, proceed to "To remove flickering or blurring".
or to eliminate vertical bars.
.
.
.
.
.
Chapter2AdjustingScreens
25