3-9. Changing DUE (Digital Uniformity Equalizer)
Setting
The DUE setting can be changed.
Settings
Brightness
Uniformity(Default
setting)
Attention
• To change the DUE setting, the adjusted monitor display must be readjusted. Perform the target adjustment again using
ColorNavigator or ColorNavigator Elements. Regarding ColorNavigator and ColorNavigator Elements, see
ColorNavigator / ColorNavigator Elements" (page
Procedure
1. Press
to turn off the monitor.
2. Holding
The "Optional Settings" menu appears.
3. Choose "DUE Priority" from "Optional Settings", and press
4. Select "Uniformity" or "Brightness" with
5. Select "Finish" with
6. Press
.
3-10. Reset to default
The setting values are reset to the default settings.
Attention
• After resetting, you cannot undo the operation.
Note
• Regarding the default setting, see
●
To reset the color adjustments
This function only resets the color adjustment value for the currently selected mode to the default settings.
Procedure
1. Choose "Color" from the Adjustment menu, and press
2. Choose "Color Reset" from "Color", and press
3. Select "Execute" with
4. Press
.
Makesthebrightnessandcolorofthewholescreenuniformwithoutchangingthe
maximumbrightnessandcontrastratio.Thebrightnessofahighgradationareaisnot
corrected.Selectthissettingtoprioritizethelevelsofthebrightnessandcontrastoverthe
uniformityinthehighgradationarea.
Makesthebrightnessandcolorofthewholescreenuniform.Thebrightnessofahigh
graduationareaisalsocorrectedsoitisuniform.Selectthissettingtoprioritizethe
uniformityoverthelevelsofthebrightnessandcontrastinthehighgradationarea.
10).
down, press
for at least two seconds to turn on the monitor.
or .
"Main Default Settings (CS230, CX240)" (page
or .
Function
.
or , and press
.
52).
.
.
"To use
Chapter3SettingMonitor
35