Adjusting Color; To Select The Display Mode (Color Mode) - Eizo ColorEdge CS230 User Manual

2-3. Adjusting Color

●

To select the display mode (color mode)

This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode
CS230 CX240
1-User1 1-User1
2-User2 2-User2
3-User3 3-User3
4-Paper 4-Paper
- 5-Adobe
5-sRGB 6-sRGB
6-CAL 7-CAL
Note
• In CAL mode, ColorNavigator and ColorNavigator Elements can be used for adjustment.
• Available CAL mode differs depending on each input signal.
Attention
• Avoid operating any function of the monitor while using ColorNavigator and/or ColorNavigator Elements. Regarding
ColorNavigator and ColorNavigator Elements, see
Example:AtDVIinput(CX240)
Procedure
1. Press .
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
Note
• The Adjustment menu and the Mode menu cannot be displayed at the same time.
• You can disable a specific mode to be selected. For more information, see
(page 32).
• "ScreenManager Pro for LCD" allows you to select the color mode automatically according to the application used (see
"Chapter 3 Auto FineContrast" in the "ScreenManager Pro for LCD" User's Manual).
Availableforthecolorsettingsaccordingtoyourpreference.
Producesaprintedpapereffect.Suitablefordisplayingimagesfrommediasuch
asbooksanddocuments.
®
RGB SuitableforcolormatchingwithAdobe
SuitableforcolormatchingwithsRGBcompatibleperipherals.
Displaysthescreenadjustedby"ColorNavigator"colormanagementsoftware
and"ColorNavigatorElements"photocolormatchingsoftware.
Themodemenu
appears.
1-User1←→2-User2←→3-User3←→4-Paper
7-CAL←→6-sRGB←→5-Adobe
or while the mode menu is displayed.
Purpose
®
RGBcompatibleperipherals.
"To use ColorNavigator / ColorNavigator Elements" (page
®
RGB
is pressed.
"3-1. Enabling/Disabling Mode Selection"
10).
Chapter2AdjustingScreens
17