Chapter 5 Power Saving Functions; Setting Power Save - Eizo ColorEdge CS230 User Manual

Chapter 5 Power Saving Functions

5-1. Setting Power Save

This function allows you to set the monitor into the power saving mode according to the PC status. When the
monitor has shifted to the power saving mode, the images on the screen are not displayed.
Attention
• Turning off the main power switch or unplugging the power cord completely shuts off power supply to the monitor.
• Devices connected to the USB downstream port work when the monitor is in power saving mode or when the power button
of the monitor is Off (except when "USB Power Save" is set to "On" in
power consumption of the monitor varies with connected devices even in the power saving mode.
• Five seconds before the monitor enters the power saving mode, it displays a preliminary message.
Procedure
1. Choose "PowerManager" from the Adjustment menu, and press
2. Choose "Power Save" from "PowerManager", and press
3. Select "On" or "Off" with
4. Press to exit.
Power Saving System
Analog Signal Input
This monitor complies with the VESA DPM standard.
PC
On
Powersaving
mode
Digital Signal Input
- DVI signal input
This monitor complies with the "DVI DMPM" standard.
- DisplayPort signal input
This monitor complies with the "DisplayPort Standard V1.1a".
PC
On
Powersavingmode
HDMI Signal Input
The monitor enters the power saving mode after five seconds in connection with the PC setting.
PC
On
Powersavingmode
Exiting the power saving mode
If the monitor receives input, it automatically exits the power saving mode and returns to the normal display
mode.
38
Chapter5PowerSavingFunctions
or .
Operatingmode
STAND-BY Powersavingmode
SUSPENDED
Off
Operatingmode
Powersavingmode
Operatingmode
Powersavingmode
"5-5. Setting USB Power Save" (page
.
Monitor Power Indicator
Blue
Orange
Monitor Power Indicator
Blue
Orange
Monitor Power Indicator
Blue
Orange
40)). Therefore,
.