Table of Contents
Advertisement
SECTION 6: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Schedule
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
•
Loose mounting bolts.
•
Damaged sanding disc.
•
Worn or damaged wires.
•
Any other unsafe condition.
After Each Use
•
Sweep surrounding dust and shavings.
•
Clean/protect table.
Weekly Maintenance
•
Clean/vacuum dust buildup off of motor fan
and inside machine cabinet.
Model G0967 (Mfd. Since 06/23)
Cleaning &
Protecting
Cleaning the Model G0967 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it.
Protect the unpainted cast iron table by wiping it
clean after every use—this ensures moisture from
wood dust does not remain on bare metal sur-
faces. Keep the table rust-free with regular appli-
cations of a metal protectant like those shown in
Figure 36 on Page 28.
Cleaning
Sanding Disc
Using an abrasive surface cleaner can prolong
the life of a clogged sanding disc, provided it is in
otherwise good condition. See Accessories on
Page 27 for more details.
To clean sanding disc:
1.
Turn machine ON.
2.
Using table as support, rub abrasive cleaner
on sanding disc in continuous motion, cover-
ing entire surface of disc until disc is no lon-
ger clogged.
3.
Turn machine OFF.
-29-
Advertisement
Table of Contents
