1. Manuals
  2. Brands
  3. Transition Networks Manuals
  4. Media Converter
  5. E-100BTX-FX-05(10x)
  6. User manual

Transition Networks E-100BTX-FX-05(10x) User Manual

Stand-alone media converter
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

Enlarged version
to single connector 100Base-FX fiber-optic cable.
Part Number
Port One - Copper Port Two - Simplex Fiber-Optic
E-100BTX-FX-05(100) RJ-45
100 m (328 ft)*
E-100BTX-FX-05(101) RJ-45
100 m (328 ft)*
E-100BTX-FX-05(102) RJ-45
100 m (328 ft)*
E-100BTX-FX-05(103) RJ-45
100 m (328 ft)*
E-100BTX-FX-05(104) RJ-45
100 m (328 ft)*
E-100BTX-FX-05(105) RJ-45
100 m (328 ft)*
E-100BTX-FX-05(106) RJ-45
100 m (328 ft)*
E-100BTX-FX-05(107) RJ-45
100 m (328 ft)*
* Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network. (TX) = transmit, (RX) = receive
** E-100BTX-FX-05(10x) install on the network as a local and remote pair
(100/101, 102/103, etc.)
The E-100BTX-FX-05(xx) model is the
duplex fiber-optic version of the media
converter. For more information, see the E-
100BTX-FX-05(xx) user's guide 33210 on-
line at: www.transition.com.
User's Guide
E-100BTX-FX-05(10x)
Stand-Alone Media Converter
• Fast Ethernet
• Copper to Single Fiber
• 100Base-TX to 100Base-FX
Transition Networks E-100BTX-FX-
05(10x) Fast Ethernet media converter
connects 100Base-TX shielded or
unshielded twisted-pair copper cable
SC, 1310 mn (TX)/1550 nm (RX)
singlemode, 20 km (12.4 miles)**
SC, 1550 mn (TX)/1310 nm (RX)
single mode, 20 km (12.4 miles)**
SC, 1310 mn (TX)/1550 nm (RX)
singlemode, 40 km (24.8 miles)**
SC, 1550 mn (TX)/1310 nm (RX)
single mode, 40 km (24.8 miles)**
SC, 1310 mn (TX)/1550 nm (RX)
single mode, 60 km (37.3 miles)**
SC, 1550 mn (TX)/1310 nm (RX)
single mode, 60 km (37.3 miles)**
SC, 1310 mn (TX)/1550 nm (RX)
single mode, 80 km (49.7 miles)**
SC, 1550 mn (TX)/1310 nm (RX)
single mode, 80 km (49.7 miles)**
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .4
Cable Specifications . . . . . . . . . . .6
Technical Specifications . . . . . . . .8
Troubleshooting . . . . . . . . . . . . . .9
Contact Us . . . . . . . . . . . . . . . . .11
Compliance Information . . . . . . .11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E-100BTX-FX-05(10x) and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Transition Networks E-100BTX-FX-05(10x)

Summary of Contents for Transition Networks E-100BTX-FX-05(10x)

  • Page 1 E-100BTX-FX-05(10x) Stand-Alone Media Converter • Fast Ethernet • Copper to Single Fiber • 100Base-TX to 100Base-FX Transition Networks E-100BTX-FX- 05(10x) Fast Ethernet media converter connects 100Base-TX shielded or unshielded twisted-pair copper cable to single connector 100Base-FX fiber-optic cable. Part Number...

  • Page 2: Installation

    E-100BTX-FX-05(10x) Installation Installation -- continued Connect the fiber cable CAUTION: Wear a grounding device and observe electrostatic discharge precautions when setting the 4-position switch and jumper. Failure to observe Locate a 100Base-FX compliant fiber cable with male, single-stranded this caution could result in damage to the media converter. simplex connectors installed at both ends.

  • Page 3: Operation

    E-100BTX-FX-05(10x) Powering the media converter Operation -- continued Product features Install the power cord barrel connector into the back of the media Auto-Negotiation converter. The Auto-Negotiation feature allows the media converter to perform Connect the power adapter plug into AC power. automatic configuration to achieve the best possible mode of operation over a Verify that the media converter is powered by observing the illuminated link.

  • Page 4: Cable Specifications

    26.0 dB For more information on the 512-Bit Rule, see the white paper titled E-100BTX-FX-05(106) 1310 nm (TX) / 1550 nm (RX) simplex “Collision Domains” on the Transition Networks website at: Fiber-optic Transmitter Power: min: -2.0 dBm max: 3.0 dBm www.transition.com.

  • Page 5: Technical Specifications

    Contact Tech Support: 800-260-1312, Int’l: 00-1-952-941-7600. Technical Specifications • Proceed to step 2. Is the SDC LED on the media converter illuminated? For use with Transition Networks Model E-100BTX-FX-05(10x) or equivalent Standards: IEEE 802.3™ • Check the twisted-pair copper cables for proper connection.

  • Page 6: Compliance Information

    UL Listed C-UL Listed (Canada) Transition Now CISPR22/EN55022 Class A + EN55024 Chat live via the Web with Transition Networks Technical Support. CE Mark Log onto www.transition.com and click the Transition Now link. FCC Regulations This equipment has been tested and found to comply with the limits for a Class A digital device, Web-Based Seminars pursuant to part 15 of the FCC rules.
  • Page 7 In accordance with European Union Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003, Transition Networks will accept post usage returns of this product for proper disposal. The contact information for this activity can be found in the 'Contact Us' portion of this document.

Table of Contents