Table of Contents
Advertisement
7.2.1.2 Extracting data blocks
If data read is in the comma-delimited CSV format, the scanner extracts data blocks specified by the data block numbers
from a code specified by the "Code type" and then outputs it in the data transmission format selected in the scanner (see
Chapter 9, Section 9.2). The extraction conditions and data bock numbers are listed below.
! Extraction conditions
Extraction conditions
"Code type"
"Data transfer regardless of error result"
If the scanner fails to extract a data block or scans a code not specified by "Code type" when the "Data transfer regardless
of error result" is permitted, then it outputs the data read as is without editing.
! Data block numbers
Each data block number should be within the range from 1 through 99. Up to three blocks can be extracted.
Choices
Any code
QR Code
PDF
Data Matrix
MaxiCode
UPC-A/EAN-13
UPC-E
EAN-8
Code 128
EAN-128
Codabar (NW-7)
Code 39
Interleaved 2of5 (ITF)
RSS
EAN.UCC Composite symbology
Permit/Prohibit
16
Advertisement
Table of Contents
