Chapter 12 Qr-Coded Parameter Menu; Parameter Setting Procedure Using The Qr-Coded Parameter Menu - Denso GT10Q-SR User Manual

Chapter 12 QR-Coded Parameter Menu

12.1 Parameter setting procedure using the QR-coded parameter menu

"Start setting"
↓ The beeper sounds three times.
Scan parameter setting QR
codes.
↓
"End setting"
The beeper sounds three times.
Scanning the "All defaults" QR code in the QR-coded parameter menu makes all items in the menu revert to the factory
defaults.
TIP: "Beeper volume" QR code in the QR-coded parameter menu
The beeper volume can be set even if the above procedure is omitted. No "Start setting" or "End setting" QR code is
required to be scanned.
Each time the "Beeper volume" QR code is scanned, the beeper volume cycles through High, Medium and Low. The
factory default is High.
Scan the "Start setting" QR code.
Scan necessary parameter setting QR codes.
Scan the "End setting" QR code.
56