Chapter 10 Image Capturing
10.1 Outline
The scanner supports image capturing that allows you to capture a graphic as a bitmap (BMP) or JPEG image and output
it to the host PC.
The video mode can be selected from standard VGA, 1/4 VGA and 1/16 VGA. If you select 1/4 VGA or 1/16 VGA,
select also the output image area--the full image area or the center portion of the image area. When the full image area is
selected, the scanner thins out the resolution of the full image area by skipping every other pixel so that the image quality
becomes low; when the center portion is selected, the scanner extracts the center portion of the image area so that the
visual area becomes smaller but the image quality does not change.
The scanner can also output a thumbnail to help you aim at a target. The thumbnail images can be saved only as a BMP
image in 1/64 VGA.
You can select the output format, video mode, output image area and whether or not to use a thumbnail by modifying the
parameters of the IMAGEOUT command.
10.2 Image capturing specifications
(1) Output file format
BMP or JPEG file format
(2) Video mode and output image area
Video mode
Standard VGA
1/4 VGA
1/16 VGA
Thumbnail (1/64 VGA)
(3) Communications protocol for image transmission
Xmodem 1K
(4) Image output command
IMAGEOUT#1#m#n
IMAGEOUT#1#m#n#o
The selections available for parameters l, m, n and o are as follows:
l: Output file format
B
BMP
J
JPEG
m: Video mode
0
Standard VGA
2
1/4 VGA
4
1/16 VGA
Resolution (Number
BMP
of pixels)
640 x 480
320 x 240
160 x 120
80 x 60
Enable the thumbnail transmission
Disable the thumbnail transmission
JPEG
√
√
Full image area
√
√
Full or center portion of the image area
√
√
Full or center portion of the image area
√
--
Full image area
43
Image output area