12.2 QR-coded parameter menu
! Menu control (Starting/Ending the Setting Procedure and Reverting to Defaults)
"Start setting"
"Defaults"
The beeper volume can be set by scanning the following QR Code symbol only. No "Start setting" or "End setting"
QR Code symbol is required to scan.
Adjusting the beeper volume
Scanning this QR code cycles the beeper volume through High, Medium and Low. The factory default is High.
"Cancel"
"Beeper volume"
57
"Start setting"
(When the "White code on
black background" is set)"
"End setting"