Table of Contents
Advertisement
Codabar (NW-7)
Items
Scanning Codabar (NW-7)
Min. number of digits to be scanned
for Codabar (NW-7)
Max. number of digits to be scanned
for Codabar (NW-7)
Transmission of start/stop codes
for Codabar (NW-7)
Code 39
Item
Scanning Code 39
Min. number of digits to be scanned
for Code 39
Max. number of digits to be scanned
for Code 39
Transmission of start/stop codes for Code 39
Code 128, EAN-128
Items
Scanning Code 128
Scanning EAN-128
Min. number of digits to be scanned
for Code 128 and EAN-128
Max. number of digits to be scanned
for Code 128 and EAN-128
(Note 1) The setting ranges are different from the numbers of digits that the scanner can actually read.
(Note 2) Using the QR-coded parameter menu enables or disables scanning of both Code 128 and EAN-128 at the same time.
Parameters
Enable, without a check digit
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Disable
3 to 99 digits
(including start/stop codes)
Enable
Disable
Parameters
Enable, without a check digit
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Disable
1 to 99 digits
(excluding start/stop codes)
Enable
Disable
Parameters
Enable
Disable
Enable
Disable
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
50
Defaults
Refer to:
√
Section 12.2
4 digits
(See Note 1.)
99 digits
√
Section 12.2
Defaults
Refer to:
√
Section 12.2
1 digit
(See Note 1.)
99 digits
Section 12.2
√
Defaults
Refer to:
√
Section 12.2
(See Note 2.)
√
1 digit
(See Note 1.)
99 digits
Advertisement
Table of Contents
