Table of Contents
Advertisement
• The scanner uses a laser light for indicating
the scanning range. The intensity of laser light
might be too low to inflict bodily injury.
However, do not look into the laser beam.
The scanner complies with IEC
60825-1:1993+A2:2001 and 21 CFR 1040.10,
1040.11 except for deviations pursuant to
Laser notice No. 50, dated July 26,2001.
In accordance with Clause 5, IEC 60825-1, the
following information is provided to the user:
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Caution – Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser light exposure.
• Do not put the scanner on an unstable or inclined plane.
The scanner may drop, creating injuries.
• Never put the scanner in places where there are excessively high temperatures, such as inside
closed-up automobiles, or in places exposed to direct sunlight.
Doing so could affect the housing or parts, resulting in a fire.
• Avoid using the scanner in extremely humid areas, or where there are drastic temperature changes.
Moisture will get into the scanner, resulting in malfunction, fire or electrical shock.
• Do not place the scanner anyplace where it may be subjected to oily smoke or steam, e.g., near a
cooking range or humidifier.
Doing so could result in a fire or electrical shock.
• Never disassemble or modify the scanner; doing so could result in an accident such as break or fire.
Doing so could result in a fire or electrical shock.
• If you are not using the scanner for a long time, be sure to unplug the AC adapter from the wall
socket for safety.
Failure to do so could result in a fire.
iv
Never
disassemble
Advertisement
Table of Contents
