Chapter 11 Parameters and Defaults
The tables below list the parameters and their default values. You can change them using the QR-coded parameter menu
or configuration software. Note that shadowed parameters can only be set in the configuration software.
When the scanner leaves the factory, all of these parameters are set to defaults.
(1) Reading modes
Items
Scanning modes
Data editing
Barcode Reader mode
Point Scan mode
Parameters
Regular Read mode
Data Verification mode
(Scan lock disabled)
Data Verification mode
(Scan lock enabled)
No editing
Data Extraction mode
Delimited-text Format Conversion
mode
Enable (Barcode Reader mode)
Disable (Normal Reader mode)
Enable
Disable
45
Defaults
Refer to:
√
Section 7.1
√
Section 7.2
Section 7.3
√
Section 7.4
√