Table of Contents
Advertisement
(4) Specify COM port.
The USB-COM driver does not need this setting, so simply press the OK button. This completes HyperTerminal
setup.
(5) Read a bar code with the scanner. Setup is complete if the data displays normally.
*
As an alternative to HyperTerminal, the Denso keyboard interface (QR_kbif) software allows the display of data
from the scanner on the computer screen for any program accepting keyboard input. It is available as a free
download from our website "QBdirect" at
register as a member (free of charge).
http://www.qbdirect.net.
118
Before downloading, you are requested to
Advertisement
Table of Contents
