Table of Contents
Advertisement
(3) Press the SETUP button on the rear of the Bluetooth
SETUP button
The interface/power supply LED flashes orange, indicating that the Bluetooth
mode.
(4) Wait for the Fount New Hardware wizard (Windows XP/Windows 2000)* to automatically start on the computer.
Following the wizard's on-screen instructions, install the USB-COM port driver.
For further details on installing the USB-COM port driver, refer to the Bluetooth
(5) Check the port number for the driver just installed with the Windows Device Manager, under Ports.
(6) Start the configuration software (BASetting) on the computer. Press the OK button when the following screen
appears.
(7) When the following screen appears, specify the port number for the USB-COM port driver installed.
*
New Hardware Found wizard (Windows Me) or Add New Hardware Wizard (Windows 98/98SE)
®
adapter for at least 0.5 second to switch it to Setup mode.
112
®
Bluetooth
adapter (rear)
®
adapter has switched to Setup
®
Adapter user's manual.
Advertisement
Table of Contents
