Substituting Data - Denso GT10B-SB User Manual

(3) Extracting data from the specified start to tail positions
The start position must be within the range from the 2nd to 99th digits. If the number of digits in bar code data read
does not reach the specified start position, an error occurs.
(Example)
Start position
3rd digit
8th digit
12th digit
(4) Extracting data from the specified start to end positions
The start and end positions must be within the range from 2nd to 99th digits each. The end position must be equal to
or greater than the start position. If the number of digits in bar code data read does not reach the specified start or end
position, an error occurs.
(Example)
Start position
3rd digit
8th digit
10th digit
8.2

Substituting Data

The scanner searches for the specified string (max. 10 characters long) in bar code data read, starting from the
specified start position (the head to the 10th position) to the end. If the bar code data contains the specified string, the
scanner substitutes it with the specified substitution string (max. 3 characters long) and transfers it according to the
substitution conditions--"Transferring the substituted element string only," "Transferring the substituted element string
+ bar code data," and "Transferring the substituted full string."
The following sample bar code and scanner settings output data as listed below depending upon the substitution
conditions.
- Bar code sample
Bar code type: Code 128, Data read: 1234567890
- Scanner settings
Header: STX, Terminator: ETX, Prefix/Suffix: None, Code ID mark: Type 1,
Transmission of number of digits: 2 digits
(1) Transferring the substituted element string only
If the bar code data contains the specified substitution string within the specified search area, the scanner transfers the
substituted element string only.
(Example)
Search start position
2nd digit
5th digit
9th digit
Output data
[STX]K0834567890[ETX]
[STX]K03890[ETX]
Error
End position
7th digit
10th digit
11th digit
Search string Substitution string
456
890
890
Output data
[STX]K0534567[ETX]
[STX]K03890[ETX]
Error
A [STX]K01A[ETX]
XYZ [STX]K03XYZ[ETX]
XYZ Error
26
Output data