Three-Jaw Chuck
the chuck will spin out of balance an create an
extreme thrown workpiece hazard!
Reversing Jaw Positions & Clamping
a Workpiece
Figure 25
Figure 25.
To use the 3-jaw chuck:
1.
2.
Otherwise
3.
26
4.
Always securely tighten
jaws and remove all tools
from the lathe before start-
ing spindle! Thrown objects
from a lathe can cause seri-
ous injury or death to the
operator and to bystand-
ers.
Figure 26.
Steps 2 3
Figure 26
Figure