Spindle Break-In
NOTICE
Do not place this machine into service and
subject it to normal work loads until it is
completely broken-in and the gearbox oils
have been changed! Otherwise, bearings
can improperly seat, and gears can develop
excessive backlash and result in vibration
or noisy operation.
To correctly break-in the spindle bearings:
1.
2.
Test Run
3.
4.
5.
6.
7.
Figure 11
Recommended
Adjustments
SERVICE
Page 59
Factory adjustments that should be verified:
Chuck and Faceplate Removal/Installation
Page 27
Page 61
Page 29
Page 36
Page 63