Grizzly G0709 Owner's Manual page 30

Figure 21.
4.
CAUTION: The chuck may come off at this
point, so it is important you are ready to
support its weight.
Large chucks are very heavy. Always get
assistance when removing or installing
large chucks to prevent personal injury or
damage to the chuck or lathe.
5.
Figure 22.
To install the chuck or face plate:
Figure 22
Chuck & Faceplate Installation
1.
2.
3.
4.
Camlock Stud Installation
.
NOTICE
Never install a chuck or faceplate without
having the camlock cap screws in place
or fully tightened. If you ignore this notice,
once installed the chuck may never be able
to be removed since the camlock studs will
turn with the camlocks and never release.
5.
Figure 24
6.
Figure 23
Figure 23.
Figure 23