Spindle Motor 110V & 220V Connection
Main Motor
220V
Connection
To
Page
76
Optional
110V
Connection
To
Page
76
READ ELECTRICAL SAFETY
ON PAGE 74!
MOTOR DIRECTION
220V
If the lathe chuck rotates in the
opposite direction of what the
spindle ON/OFF lever indicates,
disconnect the lathe from power. At
the motor junction box, swap the
positions of the wires marked U
U
. This will match the motor and
2
spindle rotation to what is indicated
at the spindle ON/OFF lever.
MOTOR DIRECTION
110V
If the lathe chuck rotates in the
opposite direction of what the
spindle ON/OFF lever indicates,
disconnect the lathe from power. At
the motor junction box, swap the
positions of the wires marked Z
Z
. This will match the motor and
2
spindle rotation to what is indicated
at the spindle ON/OFF lever.
and
1
and
1