Grizzly G0709 Owner's Manual page 22

14" x 40" gunsmithing lathe
Hide thumbs Also See for G0709:
Table of Contents

Advertisement

NOTICE
NEVER shift lathe gears when lathe is
operating, and make sure both the half-
nut lever and the feed selection lever are
disengaged before you start the lathe!
Otherwise the carriage may feed into
the chuck or tailstock and cause severe
damage.
5.
Figure 11.
6.
OFF
Before starting the lathe, make sure you
have performed any preceding assembly
and adjustment instructions, and you have
read through the rest of the manual and
are familiar with the various functions and
safety features on this machine. Failure to
follow this warning could result in serious
personal injury or even death!
7.
8.
Figure 11
Figure 12
Figure 12)
Figure 12.
9.
Note: As long as the feed direction lever
shown in Figure 12 is disengaged, no torque
will be transmitted to the quick change gear-
box or any other gear-driven component.
As a result, the feed speed dials shown in
Figure 12 can be left engaged or disengaged
for the test run.
10.
11
Motor Wiring
NOTICE
Figure 12
Figure
Step
Page
78,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents