External Speaker (Jfp2); Hdd Led Connector (Jfp2); Sm Bus Connector (Jfp2 Pin 6,8) - Advantech AIMB-567 User Manual

JFP1
pin.1
pin.2
pin.3
pin.4
2.9.3

External Speaker (JFP2)

JFP2 is a 4-pin connector for an external speaker. If there is no external speaker, the
AIMB-566 provides an onboard buzzer as an alternative. To enable the buzzer, set
pins 5-7 as closed.
2.9.4

HDD LED Connector (JFP2)

You can connect an LED to connector JFP2 to indicate when the HDD is active.
2.9.5

SM Bus Connector (JFP2 PIN 6,8)

This connector is reserved for Advantech's SNMP-1000 HTTP/SNMP Remote Sys-
tem Manager. The SNMP-1000 allows users to monitor the internal voltages, temper-
ature and fans from a remote computer through an Ethernet network.
JFP2 PIN 6,8 can be connected to CN19 of SNMP-1000. Please be careful about the
pin assignments, pin 6 must be connected to pin 1, and pin 8 to pin 2 on both ends of
cable.
AIMB-567 User Manual
#PWR_SW
GND
#RST_SW
GND
20