Jumpers And Connectors; Table 1.1: Jumpers; Table 1.2: Connectors - Advantech AIMB-567 User Manual

Power consumption:
+5 V @ 4 A, +3.3 V @ 1.02 A, +12 V @ 2.35 A, 5 VSB @ 0.26 A, -12 V @ 0.12
A Measure the maximum current value which system under maximum load
(CPU: Top speed, RAM & Graphic= full loading).
Board size: 244 mm x 244 mm (9.6" x 9.6")
Board weight: 0.75 kg
1.4

Jumpers and Connectors

Connectors on the AIMB-567 motherboard link it to external devices such as hard
disk drives and a keyboard. In addition, the board has a number of jumpers used to
configure the system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.

Table 1.1: Jumpers

Label
CMOS1
JCASE1
PSON1
JSETCOM3

Table 1.2: Connectors

Label
JFP1
JFP2
JFP3
Keyboard Lock and
Power LED
LPT1
USB56
USB78
VGA1
DVI1
VOLT1
IDE1
COM1/COM2
COM 3 ~ 4
KBMS1
KBMS2
CPU_FAN1
SYS_FAN1
SYS_FAN2
LAN1_USB12
AIMB-567 User Manual
Function
CMOS clear
Chassis Instruction Connector
AT/ATX mode selector
Serial port:RS232/RS422/RS485 jumper setting
Function
Power Switch / Reset connector
External speaker / SATA HDD LED connector / SM Bus connector
Power LED
Suspend: Fast flash (ATX/AT)
System On: ON (ATX/AT)
System Off: OFF (AT)
System Off: Slow flash (ATX)
Parallel port (on board)
USB port 5, 6 (on board)
USB port 7 8(on board)
VGA connector
Extension I/O board connector 2 (Support DVI)
Connector to check chassis LED board
Primary IDE connector (Black)
Serial port: COM1/COM2 (9-pin connector)
Serial port: COM 3 ~ 4 (40-pin connector)
PS/2 keyboard and Mouse connector Cable length: 20 meter
PS/2 keyboard and Mouse connector (on board)
CPU FAN connector
System FAN connector 1
System FAN connector 2
LAN1/USB port 1, 2
4