Blocking A Route - Becker TRAFFIC STAR NAVIGATION Operating Manual

>>> NAVIGATION MODE
Displaying the route list
You can display the route in a list.
> ZH
> With the entire route displayed, select
> EN
.
Route list
The route list is displayed.
Setting route options
You can set the route options.
> With the entire route displayed, select
.
Options
> Select
Route options
> Set the route options as described under
"Route options" on page 43.
After a change, the route is recalculated.
38
Simulating a route
You can also start a simulation of the
route.
> With the entire route displayed, select
Options
> Select
The route is simulated at four times the
normal speed.
.
.
.
Simulation

Blocking a route

You can block a stretch of road ahead.
This determines a certain stretch of road
that should not be used. The Becker®
TRAFFIC STAR NAVIGATION then
attempts to calculate a diversion.
Note:
• Destination navigation is stopped
during section selection.
• The maximum length of a section is 31
mi. (50 km)
• During the section selection, you can
go back to the current point by press-
ing the button.
> In the route menu, select
Block ahead
.