Becker TRAFFIC STAR NAVIGATION Operating Manual page 23

Starting route guidance
> In the address input menu, select
to start route guidance.
guidance
All data entered thus far is processed when
calculating the route.
Note:
The symbols above the address refer to
restrictions that you may have activated
(e.g. unpaved roads, toll roads).
Is so far no active route guidance and the
function for automatic alternative route
selection is enabled (See "Route options"
on page 43.), you have in the following
menu the option to calculate alternative
routes.
Start
> Select
Calculate alternative routes
the alternative route calculation. Then
select one of the displayed routes.
or
> Select
to apply the displayed
Use route:
route.
The map will then be displayed and the
route guidance will begin.
If the route guidance is already running,
you have no option to select alternative
routes. You will be asked whether the new
destination should replace the old destina-
tion or if the new destination should be re-
garded as a stopover.
NAVIGATION MODE
> Select
Add as stopover
.
destination
If the route guidance is already running
and a stopover has already been entered
you will be asked whether the new desti-
nation should replace the old destination
for
or the stopover.
> Select
Replace stopover
.
old destination
>>>
or
Replace old
> ZH
> EN
or
Replace
23