Gps Settings; You Can Set Up The Connection To The Gps - Kogan EziNav G3 User Manual

4.3” touchscreen gps with bluetooth
Table of Contents

Advertisement

Button
Speed Camera
Warning
Warn if Too Fast for a
Pedestrian
Safety Mode

4.5.7 GPS settings

You can set up the connection to the GPS receiver. Tap the following buttons:
.
Button
GPS receiver ...
GPS Enabled
80
warns you (100% is the current speed limit):
In Built-up Areas: in cities and towns
Elsewhere: at all other locations
There are two types of warnings. You can turn them on or off
independently:
Audible Warning: A voice message is played using the
selected voice guidance profile.
Visible Warning: A symbol with the speed limit appears in the
corner of the map (for example:
This feature allows you to receive a warning when approaching a
Road Safety Camera. You must ensure on your own liability that
using this feature is legal in the country where you intend to use it.
You have the following options:
Audible Warning: beeps can be played while you are
approaching the camera, or just alert sounds if you exceed the
speed limit while approaching one of these cameras.
Visible Warning: the type of the camera and the controlled
speed limit appears on the Map screen while you are
approaching one of these cameras.
Enable this warning to be alert if pedestrian mode is activated and
you drive fast. You are asked if you want to change to car navigation
mode. This way you can be sure you will not be routed via one-way
roads in the wrong direction as a pedestrian could, for example.
Safety Mode disables the touch screen above 10 km/h (6 mph) to
keep your attention on the road. While driving, you will not be able to
set a new destination or to change settings. The only screen control
that remains enabled is the gesture that puts you back on the Map
screen.
The first line of the screen informs you about the connection
status of the GPS receiver.
Connecting the GPS receiver is automatic in Nav N Go iGO 8,
so normally you will not need this screen of settings at all.
Turn the connection to the GPS receiver on or off. Turning off
the GPS receiver can be useful for indoors use or demonstration
Description
).
Description
,
,

Advertisement

Table of Contents
loading

Table of Contents