Table of Contents
Advertisement
4.
[optional] When finally the list of results appear, you can sort the list:
•
around a single location)
•
straight line (available when you search around a single location)
•
position (available when you search along the active route)
•
you search along the active route)
5.
Tap the desired POI in the list.
6.
The map appears with the selected point in the middle. Tap
(Simple mode) or
route is then automatically calculated, and you can start navigating.
3.1.5 Selecting the destination with a saved POI search criteria
POI search criteria can be saved in the POI section of the Manage menu, but Nav N Go iGO
8 is already shipped with some saved criteria you can use instantly when searching for a POI.
The procedure is explained starting from the Navigation menu.
1.
Tap the following buttons:
mode).
2.
Tap
3.
Select one of the saved criteria, and the list of matching POIs appear.
4.
Tap the desired POI in the list.
5.
The map appears with the selected point in the middle. Tap
(Simple mode) or
route is then automatically calculated, and you can start navigating.
3.1.6 Selecting the destination from the History
The destinations that you have set earlier appear in the History.
The procedure is explained starting from the Navigation menu.
42
: sort the list alphabetically (available when you search
: sort the list by the distance from your current position in a
: sort the list by the distance to drive on route from your current
: sort the list by the size of the needed detour (available when
(Advanced mode) from the Cursor menu. The
(Simple mode), or
.
(Advanced mode) from the Cursor menu. The
,
(Advanced
Advertisement
Chapters
Table of Contents
