Kogan EziNav G3 User Manual page 80

In the top section of the screen you see information about the current route. The fields on this
screen are continuously updated while you keep the screen open.
When you open the screen, all fields contain information about reaching your final destination.
Tap any of the fields to see data on the via points starting from the first one through the final
destination again.
You have the following data and functions on this screen:
Name
Route line
Estimated Arrival
Distance Left
Time Left
Method
Warning icons
Description
The upper part of this screen shows
your planned route as a horizontal
line. Its leftmost point is the start of
the route, the rightmost one is the
final destination, and you can see
your via point flags along the line,
spaced in proportion
distance.
Shows the estimated arrival time at
the final destination of the route
based on information available for
the remaining segments of the route.
The calculation cannot take into
account traffic jams
possible delays.
Shows the distance you need to
travel on the route before reaching
your final destination.
Shows the time needed to reach the
final destination of the route based
on information available for the
remaining segments of the route.
The calculation cannot take into
account traffic jams
possible delays.
This field shows how the route was
calculated. It either displays the
Route Calculation Method or the
Vehicle field from the Route Planning
options. If you have chosen Car, Taxi
or Bus, the type of the route (Fast,
Short, Easy or Economical) will be
displayed here; if you have selected
Emergency, Bicycle or Pedestrian,
this information will be displayed
here.
In these square fields graphical
symbol are displayed
warnings are attached to the planned
Function
Tap this field to change the
content of all data fields to
via point information.
to their
Tap this field to change the
content of all data fields to
via point information.
and other
Tap this field to change the
content of all data fields to
via point information.
Tap this field to change the
content of all data fields to
via point information.
and other
Tap this field to change the
content of all data fields to
via point information.
Tap any of the icons for an
explanation.
in case
61