Selecting The Destination From The Pois - Kogan EziNav G3 User Manual

1. Tap the following buttons:
(Advanced mode).
2. Tap the Favourite that you want to set as your destination.
3. The map appears with the selected point in the middle. Tap
(Simple mode) or
route is then automatically calculated, and you can start navigating.

3.1.4 Selecting the destination from the POIs

You can select your destination from the POIs included with Nav N Go iGO 8 or from the ones
you have previously created.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
mode).
2. Select the area around which the POI should be searched:
•
: The POI will be searched around a given address.
•
: The map appears with the Cursor in the middle. Modify the location of
the Cursor if necessary, then tap
searched around the given location.
•
•
route.
•
size of the detour it means from the active route. This can be useful if you
search for a later stopover that causes only a minimal detour. For example
upcoming petrol stations or restaurants.
3. You can narrow the search with the following:
•
Select the POI group (e.g. Accomodation), and after that, if needed, select the
POI subgroup (e.g. Hotel or Motel).
•
To find the POI by its name, tap
enter a part of the name.
•
To list all POIs in a given POI group, tap
(Advanced mode) from the Cursor menu. The
(Simple mode), or
: The POI will be searched around the current GPS position.
: The POI will be searched around the destination of the active
: The POI will be searched not around a given point but by the
(Simple mode) or
. The POI will be
, and use the keyboard to
,
, (Advanced
.
41