Sound Settings; Route Planning Options; You Can Adjust The Sounds Of Nav N Go Igo; These Settings Determine How Routes Will Be - Kogan EziNav G3 User Manual

Button
Show Street Names
Lane Information

4.5.2 Sound settings

You can adjust the sounds of Nav N Go iGO 8. Tap the following buttons:
.
Button
Master Volume
Voice Guidance Volume
Key Sounds
Dynamic Volume

4.5.3 Route Planning options

These settings determine how routes will be calculated. Tap the following buttons:
,
Button
Street names and POI icons can be disturbing on the map
during navigation. With this switch you can suppress these map
elements when Nav N Go iGO 8 is following your position on the
map. If you move the map, both the street names and POI icons
reappear immediately.
Some maps contain lane information to help you position your
car in the upcoming intersection. This setting tells Nav N Go iGO
8 whether to display this information at the top or at the bottom
of the map.
Use the switch to mute all sounds of the device and then to re-
enable them again. The position of the fader determines the
volume level.
The loudness of Nav N Go iGO 8 is independent of your device
settings. When you exit the program, the device default settings
return.
The slider adjusts the loudness of voice prompts. In its leftmost
position, the voice guidance is suppressed; in its rightmost
position, the master volume applies.
Key sounds are audible confirmation of either pressing hardware
buttons or tapping the touch screen.
The switch turns the key sounds on or off. Key sounds are
played at the master volume level.
When driving at high speed, the noise in the car may be too loud
to clearly hear the voice guidance and other sounds. Using
Dynamic Volume you can instruct Nav N Go iGO 8 to increase
the volume when your speed exceeds a certain minimum, and
reach its highest volume at the given maximum speed.
.
Description
Description
Description
, ,
,
75