Entering An Address With A Postal Code - Kogan EziNav G3 User Manual

1. Tap the button with the name of the settlement, or if you have changed
the country/state, tap
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
•
•
4. Pick the settlement from the list.
4. Tap the
5. The map appears with the selected point in the middle. Tap
(Simple mode) or
route is then automatically calculated, and you can start navigating.

3.1.2.7 Entering an address with a postal code

All of the above address searching possibilities can be performed with entering the postal
code instead of the settlement name. Find below an example with a full address:
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
mode).
2. By default, Nav N Go iGO 8 proposes the country/state and settlement where you are.
If needed, tap the button with the name of the country/state, and select a different one
from the list.
3. Tap the button with the name of the settlement, and enter the postal code:
1. Start entering the postal code on the keyboard.
2. Get to the list of results:
•
After entering a couple of numbers, the ones that are a match appear in a
list.
•
Tap
automatically.
3. Pick the settlement from the list.
4. Enter the street name:
1. Tap
2. Start entering the street name on the keyboard.
3. Get to the list of results:
After entering a couple of characters, the names that match the
string appear in a list.
Tap
appears automatically.
button.
(Advanced mode) from the Cursor menu. The
.
.
to open the list of results before it
(Simple mode), or
to open the list of results before it appears
, (Advanced
39