Tmc Settings; You Can Set Up The Connection To The Tmc - Kogan EziNav G3 User Manual

Button
Port
Baud Rate
Autodetect

4.5.8 TMC settings

You can set up the connection to the TMC receiver. If the TMC receiver is working, you can
select the radio station to be received. Tap the following buttons:
.
If there is no TMC receiver connected to Nav N Go iGO 8, you have the following options:
Button
No TMC Hardware Found!
Protocol
Port
Baud Rate
Autodetect
With a TMC receiver already connected, the content of the screen is different:
Button
Use Auto-tuner
,
Exclude This Station
Show Excluded Stations
purposes.
The communication port used between the GPS receiver and
the application.
The communication speed used between the GPS receiver and
the application.
Tap this button and let Nav N Go iGO 8 find and connect the
GPS receiver.
The first line of the screen informs you about the connection
status of the GPS receiver.
Connecting the TMC receiver is automatic in Nav N Go iGO 8,
so normally you will not need this screen of settings at all.
The communication protocol used between the TMC receiver
and the application.
The communication port used between the TMC receiver and
the application.
The communication speed used between the TMC receiver and
the application.
Tap this button and let Nav N Go iGO 8 find and connect the
TMC receiver.
If Auto-tuner is turned on, the tuner of Nav N Go iGO 8 sweeps
through the FM CCIR radio band searching for a TMC signal.
The first station with TMC data will be used automatically. When
no TMC signal is available, the tuner keeps on searching. Turn
off Auto-tuner to select a radio station manually.
When Auto-tuner is turned off, search for the desired radio
station manually with these buttons.
Push this button to put the currently received FM radio station on
an exception list, and make Nav N Go iGO 8 search for another
station instead.
This button opens the list of radio stations previously excluded.
Description
Description
Description
, ,
81