Selecting The Destination By Entering Its Coordinate; Creating A Multi-Point Route (Inserting A Via Point) - Kogan EziNav G3 User Manual

1. Tap the following buttons:
(Advanced mode).
2. If necessary, turn the page with
3. Tap the desired item.
4. The map appears with the selected point in the middle. Tap
(Simple mode) or
route is then automatically calculated, and you can start navigating.

3.1.7 Selecting the destination by entering its coordinate

This feature is available in Advanced mode only.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
2. [optional] Tap
coordinates.
3. Tap the latitude or longitude value to change the coordinate.
4. Enter the coordinate values in WGS84 format on the keyboard: the latitude (N or S)
and the longitude (E or W).
5. Tap
6. The map appears with the selected point in the middle. Tap
(Simple mode) or
route is then automatically calculated, and you can start navigating.

3.2 Creating a multi-point route (inserting a via point)

Multi-point routes are created from simple routes, so a route must be active first. One of the
ways of expanding the route is to keep the destination, and to add via points (intermediate
destinations).
This feature is available in Advanced mode only.
1. Select a new location as you did in the previous sections. This will be the additional
destination in the route.
2. The map appears with the selected point in the middle, and the Cursor menu opens
automatically.
(Simple mode), or
to see earlier destinations.
(Advanced mode) from the Cursor menu. The
, .
to change the format of the displayed
.
(Advanced mode) from the Cursor menu. The
,
43