Kogan EziNav G3 User Manual page 95

Button
Vehicle
Road Types Used
Route Planning
Route Calculation Method
Use Traffic Information
Recalculate to Avoid Traffic This setting determines how Nav N Go iGO 8 uses the received
Vehicle types:
•
Car
•
Taxi
•
Bus
•
Emergency vehicles
•
Bicycle
•
Pedestrian
76
You can set the type of vehicle you will use to navigate the
route. Based upon this setting, some of the road types will be
excluded from the route (e.g. motorways for pedestrians), or
some of the restrictions may not be taken into account (e.g.
emergency vehicles have only a few restrictions).
for
To let the route fit your needs, you can also set which road types
are to be considered for or to be excluded from the route, if
possible.
Excluding a route is a preference. It does not necessarily mean
total prohibition. If your destination can only be accessed using
some of the excluded road types, they will be used, but only as
much as necessary. In this case a warning icon will be shown on
the Route Information screen, and the part of the route not
matching your preference will be displayed in a different colour
on the map.
You can choose from different route types. The routing method
can also be chosen while creating the route: when the
destination is selected, tap
menu.
When TMC messages are received, this setting tells Nav N Go
iGO 8 whether to use that information in route planning.
TMC information in route recalculation:
•
Automatic: When route recalculation becomes necessary
based on the received TMC events, Nav N Go iGO 8
recalculates the route automatically.
•
Manual: When route recalculation becomes necessary
based on the received TMC events, Nav N Go iGO 8
notifies you, but you can decide whether to recalculate
the route or not.
•
Disabled: TMC events are only taken account when the
route is recalculated in an off-route situation.
Description
in the Cursor