Using The Cursor (The Selected Map Location) - Kogan EziNav G3 User Manual

Icon Status for
GPS
position
quality
Battery
status
The battery
is
charged
Vehicle type The symbol displays the vehicle type used for route

2.4.4 Using the Cursor (the selected map location)

First, place the Cursor at the desired map location with one of the following options:
•
Use the Find menu to select a location. The map returns with the selected point (the
Cursor) in the middle, and the Cursor menu appears with the available options.
•
Tap the screen and tap again to place the Cursor at the desired location. Now tap
to open the Cursor menu.
You can perform the following actions:
Button
The more lit bars, the better is the GPS position.
The device is running on battery power. The number of lit
bars represent the remaining capacity.
The device is running on external power. The battery is
being charged.
being
calculation.
In the active route, uses the Cursor as the start point by replacing
the current GPS position (available in Advanced mode only)
In the active route, uses the Cursor as the destination by replacing
the previous destination
In the active route, uses the Cursor as a via point (an intermediate
destination) preceding the destination (available in Advanced
mode only)
In the active route, uses the Cursor as the destination while
keeping the previous destination as a via point (available in
Advanced mode only)
Shows the different routes calculated by the available routing
methods. Choose the one that suits your needs the best.(available
in Advanced mode only)
Saves the Cursor as a POI(available in Advanced mode only)
Saves the Cursor as a Favourite location
Saves the Cursor as a Road Safety Camera location (available in
Advanced mode only)
More information
Action
21