Returning To Normal Navigation; Selected Location (Cursor) - Kogan EziNav G3 User Manual

•
If you choose pedestrian: The
of the icon shows your actual heading.
•
If you choose any of the vehicles: The
suppress GPS position errors. The direction of the icon is one of the directions of the
route.
To use the current GPS position, tap
the GPS position as one of the following:
•
a Favourite
•
a Road Safety Camera
•
a POI
•
a map marker Pin

2.5.2.2 Returning to normal navigation

When GPS position is available, and you have moved the map (the
not even visible), or you have rotated the map in 3D mode, the
to move the map back to the GPS position and re-enable Track-up map orientation (automatic
map rotation).
Even if you move the map while you are driving, Nav N Go iGO 8 continues
Note!
navigating if there is an active route: it plays the voice instructions and displays
the turn preview icons according to your current GPS position.

2.5.2.3 Selected location (Cursor)

If you select a location in the Find menu, or you tap the map when the map control buttons
are visible, the Cursor appears at the selected point on the map. Nav N Go iGO 8 displays the
Cursor with a radiating red dot (
the background of a 3D map view.
When the Cursor is set, tap
one of the following:
•
the start point of a route
•
a via point in a route
•
the destination of a route
You can also search for POIs around the Cursor.
Or you can save the location of the Cursor as:
•
a Favourite
•
a Road Safety Camera
•
a POI
icon is at your exact GPS position. The direction
icon is aligned to the nearest road to
. The Position menu appears and you can save
) to make it visible at all zoom levels, even when it is in
. The Cursor menu appears and you can use the Cursor as
icon is moving or is
button appears. Tap it
23