Storage; Maintenance Instructions - Stamina Gravity Inversion Table Owner's Manual

STORAGE

FOLDING THE INVERSION TABLE
Gravity Inversion Table
The
Gravity Inversion Table
To fold the
PIN(18).
Now, slide the
ADJUSTABLE INSTEP FRAME(7)
until the
SPRING PIN(18)
and slide the
pin locks the beam in place. Remove the
MAIN FRAME(4)
until the
FRAME(2),
(Make sure the
to remove it.) Push up on the center of the
REAR FRAME(2)
and

MAINTENANCE INSTRUCTIONS

The safety level of the
damage and wear.
1. Check the warning label, nylon strap, strap buckle, pivot arms, nylon bed, heel holders, small spring pin
and large spring pin for damage and wear.
2. Replace damaged and worn components immediately and/or keep the equipment out of use until repairs
are completed.
can be easily folded for storage.
loosen
HEIGHT ADJUSTMENT BEAM(6)
HEIGHT ADJUSTMENT BEAM(6)
MAIN FRAME ASSEMBLY
PIVOT ARMS(5)
NYLON STRAP
FOLDING LINKAGES(3)
together until they meet.
Gravity Inversion Table
LOCKING KNOB(19)
all the way up into the
MAIN FRAME(4),
is just below the
come out of the slots located at the top of the
is not attached to the
can be maintained only if it is examined regularly for
13
LARGE SPRING
and pull out the
MAIN FRAME(4)
release the
slightly up or down until the spring
BASE
from the by lifting up on the
MAIN FRAME(4)
before attempting
FRONT FRAME(1)
and push the
LARGE
REAR