Stamina Gravity Inversion Table Owner's Manual
  1. Manuals
  2. Brands
  3. Stamina Manuals
  4. Fitness Equipment
  5. Gravity Inversion Table
  6. Owner's manual

Stamina Gravity Inversion Table Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual
CAUTION: 1. Weight on this product should not exceed 300 lbs.
2. Class H equipment: This equipment is for home
use only. It is not for commercial use.
2005, 12
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service Number
1 (800) 375-7520
www.staminaproducts.com
!
WARNING
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
55-1538
STAMINA PRODUCTS
MADE IN CHINA
Product May Vary Slightly
From Pictured.
2005 Stamina Products, Inc.
!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Gravity Inversion Table and is the answer not in the manual?

Questions and answers

Related Manuals for Stamina Gravity Inversion Table

Summary of Contents for Stamina Gravity Inversion Table

  • Page 1 2. Class H equipment: This equipment is for home use only. It is not for commercial use. Product May Vary Slightly From Pictured. This Product is Produced Exclusively by 2040 N. Alliance, Springfield, MO 65803 Customer Service Number 1 (800) 375-7520 www.staminaproducts.com 2005, 12 2005 Stamina Products, Inc.

  • Page 2: Table Of Contents

    Be sure that there is enough room for the bed to rotate completely. Use the Gravity Inversion Table only as described in the manual. The safety level of the Gravity Inversion Table can be maintained only if it is examined regularly for damage and wear.
  • Page 3 Gravity Inversion Table To help you get started, we have pre-assembled most of your Gravity Inversion Table at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual.

  • Page 4: Before You Begin

    BEFORE YOU BEGIN Gravity Inversion Although Stamina tries to manufacture its products Thank you for choosing the with the finest materials and uses the highest Table. We take great pride in producing this quality standards of manufacturing, occasionally a part that...

  • Page 5: Hardware Identification Chart

    HARDWARE IDENTIFICATION CHAT This chart is provided to help identify the hardware used in the assembly process. After unpacking the unit, open the hardware bag and make sure that you have the following items: 3/16" 1/4" 5/16" 3/8" 1/2" INCHES 100 110 120 130 140 150 MILLIMETERS length...

  • Page 6: Assembly Instructions

    ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed.
  • Page 7 ASSEMBLY INSTRUCTIONS SLOTS STEP 3 PIVOT ARMS(5) MAIN FRAME(4). Slide the bottom of the two into the brackets located at each side of the Align the desired hole on the arm with the peg on the bracket, and insert the peg into the hole to lock the PIVOT ARMS(5) Then secure the PIVOT ARMS(5) on the pegs with ROUND HEAD in position.
  • Page 8 ASSEMBLY INSTRUCTIONS STEP 5 FOOTREST(8) HEIGHT ADJUSTMENT BEAM(6) ADJUSTMENT Attach the onto the with the KNOB(9). NOTE: FOOTREST(8) FOOTREST(8) The four adjustment holes in the allow the to be attached in four different positions. Start with one of the center positions and adjust if necessary. Use the outer position if users are taller than average.
  • Page 9 WARNING: Gravity Inversion Table Do not use the until you have verified your height setting. Failure to use the proper height setting can result in difficulty recovering from the decline position.

  • Page 10: Operational Instructions

    OPERATIONAL INSTRUCTIONS GENERAL PRECAUTIONS Use the lowest holes in the PIVOT ARMS(5) until you become familiar with the Gravity Inversion Table. Do not use the Gravity Inversion Table alone. Always have a helper available in case assistance is needed in recovering from the decline position.

  • Page 11: Using The Inversion Table

    OPERATIONAL INSTRUCTIONS USING THE INVERSION TABLE Start by lying fully back on the bed with your hands at your side, or resting on your thighs. Keeping your hands close to your body begin to raise your arms slowly allowing the table to rotate backward.

  • Page 12: Suggestions For Use

    OPERATIONAL INSTRUCTIONS SUGGESTIONS FOR USE Begin slowly: Invert only 15-20 degrees to begin with. Stay inverted only as long as you are comfortable. Return upright slowly. Make gradual changes: Increase the angle only if it is comfortable. Increase the angle only a few degrees at a time.

  • Page 13: Storage

    STORAGE FOLDING THE INVERSION TABLE Gravity Inversion Table can be easily folded for storage. Gravity Inversion Table LOCKING KNOB(19) LARGE SPRING To fold the loosen and pull out the PIN(18). HEIGHT ADJUSTMENT BEAM(6) MAIN FRAME(4) Now, slide the all the way up into the...

  • Page 14: Product Parts Drawing

    PRODUCT PARTS DRAWING BACK FRONT...

  • Page 15: Parts List

    PARTS LIST DIAGRAM# PART NAME Front Frame Rear Frame Folding Linkage Main Frame Pivot Arm Height Adjustment Beam Adjustable Instep Frame Footrest Adjustment Knob Pad Tube Heel Holder Bracket Heel Holder Spring Roll Pin Small Spring Pin Scale Decal Bushing Large Spring Pin Locking Knob Foam Pad...

  • Page 16: Warranty

    To implement this limited warranty, send a written notice stating your name, date, and place of purchase and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield Missouri, USA, 65801-1071 or call us at 1 (800) 375-7520. If the defect is covered under this limited warranty, you will be requested to return the product or part to us for free repair or replacement at our option.

  • Page 17: Notes

    NOTES...

  • Page 18: Fax/Mail Ordering Form

    FAX/MAIL ORDERING FORM Please do not return the product. For your convenience, Stamina has a Customer Service Department with a toll-free number. Should a part be missing or a defective part found, please call 1 (800) 375-7520 (in the U.S.) between 8:00 A.M. and 5:00 P.M. Central Time, Monday through Friday or fill out the fax sheet ordering form below and fax it to (417) 889-8064.

This manual is also suitable for:

55-1538

Table of Contents

Save PDF