Stamina Inversion Table Owner's Manual
  1. Manuals
  2. Brands
  3. Stamina Manuals
  4. Fitness Equipment
  5. Inversion Table
  6. Owner's manual

Stamina Inversion Table Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual
!
WARNING
!
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
55-1527C
STAMINA PRODUCTS
CAUTION: 1. Weight on this product should not exceed 250 lbs.
MADE IN CHINA
2. Class H equipment: This equipment is for home
use only. It is not for commercial use.
Product May Vary Slightly
From Pictured.
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service Number
1 (800) 375-7520
www.staminaproducts.com
2005, 04
2005 Stamina Products, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Inversion Table and is the answer not in the manual?

Questions and answers

Related Manuals for Stamina Inversion Table

Summary of Contents for Stamina Inversion Table

  • Page 1 2. Class H equipment: This equipment is for home use only. It is not for commercial use. Product May Vary Slightly From Pictured. This Product is Produced Exclusively by 2040 N. Alliance, Springfield, MO 65803 Customer Service Number 1 (800) 375-7520 www.staminaproducts.com 2005, 04 2005 Stamina Products, Inc.
  • Page 2 TABLE OF CONTENTS Page Page Safety Instructions Maintenance Instructions Before You Begin Product Parts Drawing Hardware Identification Chart Parts List Assembly Instructions Warranty Operational Instructions Notes Storage Fax/Mail Ordering Form SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following safety instructions before using the Do not use the alone.
  • Page 3 CALL US FIRST THANK YOU FOR PURCHASING THE To help you get started, we have pre-assembled most of your at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual. Within a few minutes you will be getting your body into shape and on your way to achieving a happier and healthier lifestyle.

  • Page 4: Before You Begin

    BEFORE YOU BEGIN Thank you for choosing the . We Although Stamina tries to manufacture its products take great pride in producing this quality product and with the finest materials and uses the highest hope it will provide many hours of quality exercise...

  • Page 5: Hardware Identification Chart

    HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. After unpacking the unit, open the hardware bag and make sure that you have the following items: 3/16" 1/4" 5/16" 3/8" 1/2" INCHES 100 110 120 130 140 150 MILLIMETERS Place washers, the end of bolts or screws on the...

  • Page 6: Assembly Instructions

    SECURING STRAPS to the with the on the bottom of the covers. NOTE: PROTECTIVE COVERS(21) FOLDING LINKAGES(3) When the are assembled correctly, the should not be visible, and the INVERSION TABLE LOGO should be on the outside. Refer to the illustration.
  • Page 7 ASSEMBLY INSTRUCTIONS SLOTS STEP 3 PIVOT ARMS(5) MAIN FRAME(4). Slide the bottom of the two into the brackets located at each side of the Align the desired hole on the arm with the peg on the bracket, and insert the peg into the hole to lock the PIVOT ARMS(5) Then secure the PIVOT ARMS(5) on the pegs with BUTTON HEAD in position.
  • Page 8 ASSEMBLY INSTRUCTIONS STEP 5 FOOTREST(8) HEIGHT ADJUSTMENT BEAM(6) BOLTS(M8 x 50mm)(34), Attach the onto the with WASHERS(M8)(38), NYLOCK NUTS(M8)(36). FOOTREST(8) FOOTREST(8) NOTE: The five holes in the allow the to be attached in three different positions. Start with the center position and adjust if necessary. Use the outer position if users are taller than average.
  • Page 9 ASSEMBLY INSTRUCTIONS BUCKLE BUCKLE STEP 8 HEIGHT ADJUSTMENT BEAM(6) MAIN FRAME(4) LARGE SPRING Install the into by pulling the PIN(16) MAIN FRAME(4) HEIGHT ADJUSTMENT BEAM(6) on the and inserting the as shown. For LOCKING KNOB(17) MAIN FRAME(4). added safety, thread the into back side of the WARNING: Do not use the...

  • Page 10: Operational Instructions

    OPERATIONAL INSTRUCTIONS GENERAL PRECAUTIONS Use the lowest holes in the PIVOT ARMS(5) until you become familiar with the Do not use the alone. Always have a helper available in case assistance is needed in recovering from the decline position. Make sure that the HEEL HOLDERS(11) are holding your feet securely. Make sure that the HEIGHT ADJUSTMENT BEAM(6) is properly set for your height.

  • Page 11: Using The Inversion Table

    Keeping your hands close to your body begin to raise your arms slowly allowing the table to rotate backward. Stop, or lower your arms to control the downward rotation of the table. Raise your arms until they are over your head. At this point, the inversion table will be as far back as it can go.

  • Page 12: Recovery From Locked Position

    LOCKING THE BED When the inversion table rotates past the vertical inverted position the bed becomes locked, and will not return to the upright position in the usual way. The locked position allows you to hang straight upside-down completely free of the bed.

  • Page 13: Maintenance Instructions

    STORAGE FOLDING THE INVERSION TABLE can be easily folded for storage. LOCKING KNOB(17) LARGE SPRING PIN(16). To fold the loosen and pull out the HEIGHT ADJUSTMENT BEAM(6) MAIN FRAME(4) Now, slide the all the way up into the until the...
  • Page 14 PRODUCT PARTS DRAWING BACK FRONT...

  • Page 15: Parts List

    PARTS LIST DIAGRAM# PART NAME Front Frame Rear Frame Folding Linkage Main Frame Pivot Arm Height Adjustment Beam Adjustable Instep Frame Footrest Pad Tube Heel Holder Bracket Heel Holder Spring Small Spring Pin Scale Decal Bushing Large Spring Pin Locking Knob Foam Pad Double sided Tape Nylon Bed...
  • Page 16 To implement this limited warranty, send a written notice stating your name, date, and place of purchase and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield Missouri, USA, 65801-1071 or call us at 1 (800) 375-7520. If the defect is covered under this limited warranty, you will be requested to return the product or part to us for free repair or replacement at our option.
  • Page 17 NOTES...
  • Page 18 FAX/MAIL ORDERING FORM Please do not return the product. For your convenience, Stamina has a Customer Service Department with a toll-free number. Should a part be missing or a defective part found, please call 1 (800) 375-7520 (in the U.S.) between 8:00 A.M. and 5:00 P.M. Central Time, Monday through Friday or fill out the fax sheet ordering form below and fax it to (417) 889-8064.

This manual is also suitable for:

55-1527c

Table of Contents

Save PDF