Visual Ring (Flash Message Lamp) - Avaya 2420 User Manual

3. Press the Ring Pattern feature button.
The Select Ring Pattern screen with the current ring pattern appears.
4. Use
Note:
To listen to a specific ring pattern, press the Play softkey for a selected ring
Note:
pattern number.
5. Perform one of the following steps:
If you want to save the ringing pattern that you have just selected, press the Save
●
softkey. You will hear a confirmation tone, and you are returned to the Ring Options
screen.
If you want to return to the Ring Options screen without changing the ring pattern, press
●
the Cancel softkey.
If you want to return to page 1 of the Home screen without changing the ring pattern,
●
press
Note:
If you go off-hook, receive a call, or lose power during selection, the process is
Note:
canceled and you must start again.

Visual Ring (Flash Message Lamp)

The Flash Message Lamp option on the Ring Options screen allows you to choose a visual alert
for incoming calls. When you enable the Flash Message Lamp option, the telephone rings and
the lamp above the 2420 display area flashes when an incoming call arrives. By default, the
Flash Message Lamp option is disabled.
To set the Flash Message Lamp option
1. From the Home screen, press the Option softkey.
The Options screen appears.
2. Press the Ring Options feature button.
The Ring Options screen appears.
3. Press the Flash Message Lamp feature button.
The option setting is underlined.
4. Press the Yes/No softkey or press button 6 to indicate whether you want Flash Message
Lamp enabled.
44 2420 Digital Telephone User's Guide
and or the dialpad to cycle through all eight ringing patterns.
.