Advanced Section; Network Topology 1: Simple Lan; Figure 2-30 Multiple Power Supplies And Two Computers - Xantrex GRIB and Ethernet interface Operating Manual

Ethernet (ENET)

Advanced Section

Network Topology 1: Simple LAN

Local Computer #1
ENET
Power Supply #1

Figure 2-30 Multiple Power Supplies and Two Computers

2-26
The advanced section describes the setup and connection for various
network topologies involving multiple power supplies.
The simple LAN topology is the most common configuration for setting
up the ENET option on the XG. The topology follows the typical star
topology provided by a HUB and multiple XGs with the ENET option
and one or more computers. Figure 2-30 shows this configuration.
HUB
Power Supply #2
All devices connects via the HUB. Every device must have a unique IP
address, for example:
• Computer #1: 169.254.117.231
• Computer #2: 169.254.117.232
• Power supply #1: 169.254.117.220
• Power supply #2: 169.254.117.221
• Power supply #3: 169.254.117.222
• Power supply #30: 169.254.117.230.
You must set up every device manually.
ENET
Local Computer #2
ENET
Power Supply #30
M370078-06