Choose The "Quietest" Channel For Your Wireless Network; Led Indicators, Inputs And Outputs - NetComm MyZone YML24W-RAU User Manual

Liberty series mobile 3g wifi router
Table of Contents

Advertisement

2.5 Choose the "Quietest" Channel for your Wireless Network

In locations where homes or offices are close together, such as apartment buildings or office complexes, there may be wireless networks nearby that can
conflict with your wireless network.
Use the site survey capabilities found in the wireless utility of your wireless adapter to locate any other wireless networks that are available (see your wireless
adapter's user manual), and switch your MyZone and computers to a channel as far away from other networks as possible.
Hint: Most Wi-Fi routers set their Wireless G networks to channel 6. Changing the channel to something other than 6 may help improve your wireless
network performance.
Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from neighbouring cordless
phones or other wireless devices.

2.6 LED Indicators, Inputs and Outputs

The LED indicator display visible on the front of the MyZone provides with status information. See below for an explanation of both the indication lights.
Power Status Light
The power status light shows you the status of the built-in battery and also tells you whether the device is booting or charging.
Internet Connection Light
Once connected, the Internet LED will flash constantly to indicate data transfer. If the LED is not illuminated there is no Internet connection available.
SIM Card Slot
Insert your SIM card as shown below (push to lock, push to release). Please make sure you insert your SIM card in the correct orientation by checking the
SIM icon next to the SIM slot.
YML24W-RAU
www.netcomm.com.au
NETCOMM LIBERTY SERIES - MyZone Mobile 3G WiFi Router
LEFT LED - Power Status
COLOUR
FLASHING
Green
Battery discharging
Blue
N/A
Red
Battery low and discharging
RIGHT LED - Internet Connection Status
COLOUR
FLASHING
Green
Internet Connection active
1
To insert the SIM Card into the MyZone, first you move the stand out of your
way by pushing it away with your fingernail.
2
Once you have pushed the stand out of the way, you will notice a small
indent under the SIM Card cover.
NOT FLASHING
Battery Full and charging
Booting
Battery low and charging
UNLIT
Unable to connect to the internet
MyZone User Guide
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Myzone

Table of Contents