Table of Contents
Advertisement
2.8 Further Configuration and Reset
The MyZone has been designed to work with minimal user configuration. However if you would like to set any advanced options this can be done using the
browser based Advanced View in the MyZone Configuration Manager.
Advanced Settings
To access the advanced menu click on 'Switch to Advanced View' located at the bottom of the configuration interface
A login screen will appear, enter the default User Name and Password (admin/admin) and click submit.
Learning more about the status of your MyZone
After logging in to the Advanced View of the MyZone Configuration Manager as described above, click on the status tab to learn more about the
connection and battery status of your MyZone.
Changing wireless settings
After logging in to the web configuration as described above, click on the wireless tab to modify your network name, password or encryption strength. Save
your settings by clicking the Save/Apply button.
Setting a custom APN or other 3G Network settings
After logging in to the web configuration as described above, click on the 3G Settings tab to modify 3G network settings. Don't forget to save your changes
by clicking the Save/Apply button.
Reset to factory defaults
If you make any errors the MyZone can be reset to factory defaults by sliding and holding the power switch for 10 seconds.
Hardware Reset
In the unlikely event that something goes wrong and your Myzone requires a hardware reboot, you can reset the device rather than waiting for the battery to
flatten. To achieve this, use a pen or other pointed object to briefly depress the small button next to the SIM slot (behind the rubber cap).
MyZone User Guide
12
YML24W-RAU
www.netcomm.com.au
Advertisement
Table of Contents
