2.22 Video interfaces (CN19, CN30)
(PCM-5864 only)
The PCM-5864 board provides Video-in (CN19) and Video-out
(TV-out) (CN30). They consist of a 6-pin and an 8-pin dual-inline
header respectively. Video capture supports RCA and S-video
connectors via an optional cable kit. Its Video-in and Video-out
generators use both NTSC and PAL format.
To set up your video interface:
1. Set J25 according to whether you want NTSC or PAL format.
See Table 2-22 below.
2. Run the appropriate installation software program, located in
the utility disk.
For NTSC format, the file is 55xntsc.exe, located in:
Biscuit\5864\Video.100\69000\TV-out\
For PAL format, the file is 55xpal.exe, located in:
Biscuit\5864\Video.100\69000\TV-out\
Table
2-22:
J25
T V-out
format
select
NTSC*
1
2
3
(J25)
PAL
1
2
3
Chapter 2 Installation
37