Download Print this page

Advantech PCM-5824 Startup Manual

Ns geode sbc with cpu, vga/dstn lcd, ethernet & audio interface

Advertisement

Quick Links

PCM-5824 NS Geode
DSTN LCD, Ethernet & Audio Interface
Startup Manual

Packing List

Before you begin installing your board, please make
sure that the following materials have been shipped:
• 1 PCM-5824 all-in-one single board computer
• 1 startup manual
• 1 utility disk/CD driver, and manual (in PDF format)
• 1 2.5" IDE flat cable, 44-pin to 44-pin (part no.
1701440351)
• 1 keyboard / PS2 mouse cable (part no.
1700060201)
• 1 secondary serial port cable (part no.
1701140201)
• 1 parallel cable (part no. 1700260250)
• 1 floppy cable, for 3.5" FDD only (part no.
1701340603)
• 1 audio cable (part no. 1700160160)
• 1 USB cable (part no. 1703100260)
If any of these items are missing or damaged, contact
your distributor or sales representative immediately.
Note 1:
For detailed contents of the PCM-5824 please
refer to the enclosed CD-ROM or disk (in PDF
format).
Note 2:
Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at:
www.adobe.com/Prodindex/acrobat/
readstep.html
(Acrobat is a trademark of Adobe.)
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/epc
For technical support and service, please visit our support
website at:
http://support.advantech.com
This manual is for the PCM-5824 Rev. A102 or higher.
Part No.2006582401
Printed in Taiwan
®
SBC with CPU, VGA/

Specifications

Standard SBC Functions
• CPU:
Embedded NS GXLV-200 processor (PCM-5824-D0A1)
Embedded NS GX1-300 processor (PCM-5824-G0A1)
• BIOS: AWARD 256 KB Flash memory
• System memory: One 144-pin SODIMM socket
accepts up to 128 MB SDRAM
• Enhanced IDE interface: Supports up to two EIDE
devices. BIOS auto-detect, PIO Mode 3 or Mode 4
transfer, Ultra DMA33 mode (ATA-4) up to 33 MB/sec
• FDD interface: Supports up to two FDDs
• Serial ports: One serial RS-232 port, one serial
RS-232/422/485 port
• Parallel port: One parallel port, supports
SPP/EPP/ECP mode
• Infrared port: Shared with COM2. Transfer rate up to
115 kbps
• Keyboard/mouse connector: Mini-DIN connector
supports standard PC/AT keyboard and PS/2 mouse
• USB interface: Two USB ports, USB 1.0 compliant
• Power management: Supports power saving modes
including Normal/Standby/Suspend. APM 1.1
compliant
• Watchdog timer: 1.6 sec. intervals
VGA/LCD Interface
• Chipset: Asiliant69000 2MB SDRAM on chip, optional
69030 4MB memory on chip
• Interface: PCI interface, 64-bit graphics engine
• Display mode: Flat panel displays up to 800 x 600 @
24 bpp, 1024 x 786 @ 16 bpp. CRT monitors up to
800 x 600 @ 24 bpp, 1024 x 768 @ 16 bpp
• Dual display: Supports CRT and LCD display under
Windows 98/ Windows 2000 (69030 only)
Audio Function
• Chipset: NS CX5530
• Audio controller: AC97 version 2.0 compliant
interface
• Audio interface: Microphone in, Line in, CD audio in,
Line out, Speaker L, Speaker R
2nd Edition
Dec. 2000
PCM-5824 Startup Manual
1

Advertisement

loading

Summary of Contents for Advantech PCM-5824

  • Page 1: Specifications

    • Audio interface: Microphone in, Line in, CD audio in, Line out, Speaker L, Speaker R This manual is for the PCM-5824 Rev. A102 or higher. Part No.2006582401 2nd Edition Printed in Taiwan Dec. 2000 PCM-5824 Startup Manual...
  • Page 2: Jumpers And Connectors

    • Power supply voltage: +5 V (4.75 V ~ 5.25 V) CN18 CRT display connector • Power requirements: CN19 CompactFlash socket +5 V @ 1.5 A (typical) (for PCM-5824 w/ GXLV-200) CN20 SODIMM socket +5 V @ 4 A (Max) CN21 24 bit LCD connector...
  • Page 3 Dual Scan STN x 1280 x 1024 Color Panel Dual Scan STN x 1024 x 600 Color Panel TFT Color x 1024 x 600 Panel 0:ON X:OFF * default setting PCM-5824 Locating connectors (component side) PCM-5824 Startup Manual 1 2 3 4...
  • Page 4 Mechanical Drawings PCM-5824 Board Dimensions (component side) PCM-5824 Board Dimensions (solder side) PCM-5824 Startup Manual...