2.21 USB connectors (CN16)
The PCM-5864/E/L board provides two USB (Universal Serial
Bus) ports which gives complete plug and play, and hot attach/
detach for up to 127 external devices. The USB interfaces comply
with USB specification Rev. 1.0, and are fuse protected.
The USB interface is accessed through one 5-pin flat-cable
connector, CN16. You will need an adapter cable if you use a
standard USB connector. The adapter cable has a 5-pin connector
on one end and an USB connector on the other.
The USB interfaces can be disabled in the system BIOS setup.
36
PCM-5864/E/L User's Manual