Advantech PCM-5820 Series Startup Manual

PCM-5820 Series Pentium
VGA/LCD, Ethernet & Audio Interface
Startup Manual

Packing List

Before you begin installing your board, please make sure
that the following materials have been shipped:
• 1 PCM-5820 Series all-in-one single board computer
• 1 startup manual
• 1 utility disk/CD driver, and manual (in PDF format)
• 1 2.5" IDE flat cable, 44-pin to 44-pin (part no.
1701440351)
• 1 keyboard / PS2 mouse cable (part no. 1700060201)
• 1 secondary serial port cable (part no. 1701140201)
• 1 parallel cable (part no. 1700260250)
• 1 floppy cable, for 3.5" FDD only (part no. 1701340602)
• 1 audio cable (part no. 1700160160)
• 1 USB cable (part no. 1703100260)
If any of these items are missing or damaged, contact your
distributor or sales representative immediately.
Note 1: For detailed contents of the PCM-5820 Series
please refer to the enclosed CD-ROM or disk
(in PDF format).
Note 2: Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at:
www.adobe.com/Prodindex/acrobat/
readstep.html
(Acrobat is a trademark of Adobe.)
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/epc
For technical support and service, please visit our support
website at:
http://support.advantech.com
This manual is for the PCM-5820L Rev. A103 or higher, the
PCM-5820E Rev. A101 or higher, or the PCM-5822 Rev.
A101.
Part No. 2006582005
Printed in Taiwan
®
SBC with CPU,

Specifications

Standard SBC Functions
• CPU:
Embedded NS GXM-233 processor (PCM-5820/5820L)
Embedded NS GXM-200 processor (PCM-5820E/5822)
• BIOS: AWARD 256 KB Flash memory
• System memory: One 144-pin SODIMM socket
accepts up to 128 MB SDRAM
• Enhanced IDE interface: Supports up to two EIDE
devices. BIOS auto-detect, PIO Mode 3 or Mode 4
transfer, Ultra DMA33 mode (ATA-4) up to 33 MB/sec
• FDD interface: Supports up to two FDDs
• Serial ports: One serial RS-232 port, one serial
RS-232/422/485 port
• Parallel port: One parallel port, supports
SPP/EPP/ECP mode
• Infrared port: Shared with COM2. Transfer rate up to
115 kbps
• Keyboard/mouse connector: Mini-DIN connector
supports standard PC/AT keyboard and PS/2 mouse
• USB interface: Two USB ports, USB 1.0 compliant
• Power management: Supports power saving modes
including Normal/Standby/Suspend. APM 1.1 compliant
• Watchdog timer: 1.6 sec. intervals
Local-bus Flat Panel/VGA Interface
• Chipset: NS CX5530
• Display memory: 1 ~ 4 MB share memory, set in BIOS
• Display type: Supports CRT and TFT LCDs. Able to
display both CRT and flat panel simultaneously
• Flat-panel display mode: Panel resolution supports up
to 1024 x 768 @ 16 bpp. Supports 18-bit TFT LCD
panel
• CRT display mode: Non-interlaced CRT monitor
resolutions up to 1280 x 1024 @ 256 colors or 1024 x
768 @ 16 bpp
LVDS (Low Voltage Differential Signal) Interface
(PCM-5820, PCM-5820L, PCM-5820E only)
• Chipset: TI SN75LVDS84 or compatible chipset
• Performance: 18 low-voltage TTL data channels
ANSI/EIA/TIA-644
3rd Edition
Dec. 1999
PCM-5820 Series Startup Manual 1