Lcd Power Setting; Vga/Tv-Out Function Select (J1); Video In/Out Interfaces (Cn2) (Pcm-9550Fm Only); Table 2-9: Vga/Tv-Out Function Select (J1) - Advantech PCM-9550F User Manual

2.19.4 LCD power setting

The PCM-9550F/FM/L's PCI SVGA interface supports 5 V and 3.3
V LCD displays that provide V

2.20 VGA/TV-Out function select (J1)

The PCM-9550F/FM provides a TV-out function that is selected
by configuring J1 as shown below.

Table 2-9: VGA/TV-Out function select (J1)

2.21 Video In/Out interfaces (CN2)
(PCM-9550FM only)
The PCM-9550FM board provides Video-in and Video-out (TV-
out) (CN2). They consist of a 14-pin dual-inline header
respectively. Video capture supports RCA and S-video
connectors via an optional cable kit. Its Video-in and Video-out
generators use both NTSC and PAL format.
To set up your video interface:
1. Set J2 according to whether you want NTSC or PAL format.
See Table 2-10 below.
VGA
5 V signal on CN14.
dd
TV
Chapter 2 Installation 31