Table of Contents
Advertisement
2.19 Optional Video Out interfaces (CN26)
The PCM-9576F board provides Video-out (TV-out) (CN26). They
consist of a 5-pin wafer box header header respectively. Output
supports compiosite video and S-video connectors via an optional
cable kit. Its Video-out generators use both NTSC and PAL format.
To set up your video interface:
1. Run the appropriate installation software program, located in the
utility disk.
2.20 Ethernet configuration
The PCM-9576F is equipped with a high performance 32-bit PCI-bus
Ethernet interface which is fully compliant with IEEE 802.3U
10/100Mbps CSMA/CD standards. It is supported by all major network
operating systems.
2 8
PCM-9576F User's Manual
Advertisement
Table of Contents
