Programming (Cont.)
Fan Setting
TOUR Notes
Master Dimmer
Red, Green, Blue
White and Amber
Color Selection
Color Macros
Strobe
ID Address Selection
Auto
Dimmer Speed
March 3, 2010
1) Press <MENU> repeatedly until FANS shows, and press <ENTER> to accept.
2) Use <UP> or <DOWN> to select a setting (OFF, LOW, NORMAL, HIGH or AUTO).
3) Press <MENU> to exit once done.
a) When in AUTO, the fan speed automatically changes so the fixture's
temperature does not exceed the limit.
b) When in the other settings, the fan speed follow the predefine values.
c) The internal controller will override any manual setting if the internal
temperature rises above a certain level.
These notes intent to clarify the way the TOUR DMX personality works.
· Channel 1 controls the intensity of the currently projected color.
· When the slider is at the highest position (255) the intensity of the output is at its
maximum
· Channels, 2, 3, 4, 5 and 6 control the intensity ratio of each of the Red, Green, Blue,
White and LEDs
· When the slider is at the highest position (255) the intensity of each color is at its
maximum if SETTINGS > COLOR is OFF.
· You can combine channels, 2, 3, 4,5 and 6 to create over one trillion colors
· Channel 7 selects the required Color Macro
· Channel 7 has priority over channels 2, 3, 4 and 5
· Channel 1 controls the intensity of the Color Macro
· Channel 8 controls the strobe of channels 2~6
· Channel 12 selects the target ID address
· Each independent DMX address may have up to 66 independent ID addresses
· An ID address of 0 will activate all ID address locations
· Channel 9 selects the preset Auto programs AUTO 01~10 or the custom Auto
programs CUSTOM 01~10
· When activating the custom Auto programs CUSTOM 01~10, it is possible to control
the Step Time and Fade Time using channels 2 and 3 respectively
· Channel 9 has priority over channels 2, 3, 4, 5, 6, 7 and 8.
· Channel 10 is for selecting the dimmer mode and speed. When DIMMER is set to
OFF, RGBW and Master Dimmer are linear. Otherwise, DIM1 is the fastest dimmer
curve, while DIM4 is the slowest.
-13-
COLORado™ Batten 72 Tour User Manual Rev. 01c
Operation